Studer D950 Operating Instructions Manual page 358

D950/Vista7 Digital Mixing System
Mix Pass Notes:
Editing Mix Pass Notes:
5-28 AutoTouch+
3 Type the new name for the pass and click the "OK" button. The new Mix
Pass Name will appear in the Pass Name field and in the Mix Tree.
A set of notes can be entered and stored for each Mix Pass. Combined with
the Mix Pass Name, this can greatly benefit the organization of a large
number of passes.
A Mix Pass must be the Active Mix Pass before notes can be entered or
edited. To enter or change Mix Pass Notes, use the following procedure:
1 Make the desired Mix Pass the Active Pass if it is not already. (Click its
icon in the Mix Pass Stack or double-click its icon in the Mix Tree.)
2 Click the "Pass:" button next to the current Mix Pass Name (to the right of
the Mix Pass Stack). The Pass Info entry box will appear. See #2 above.
3 Type the new notes in the "Notes:" field and click the "OK" button. The
first few lines of the new Mix Pass Notes will appear in the AutoTouch+
window whenever that Mix Pass becomes active. If the notes are lengthy,
the complete set may be viewed by opening the Pass Info entry box.
SW V3.3 Date printed: 27.08.03