Multi-Format 5.1 Panning Parameters On The Lacp - Studer D950 Operating Instructions Manual

D950 Digital Mixing System
3.3.13.7

Multi-format 5.1 Panning Parameters on the LACP

Example: Multi-Format 5.1 Panning, Page 1
Mono 5.1 panning control parameters
LsRs BALANCE
F/S PANNING
(FRONT/SURROUND)
5.1 PANNING
3-96 Desk Operation
CENT
SW
CENT
SW
LsRs
SW
F/S
SW
5.1
MPAN
1 2
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
Available operating elements and their function
1
SW key
Rotary encoder
LED bar
Center LED
AUTO
Display
SW key
2
Rotary encoder
LED bar
Center LED
AUTO
Display
3 SW key
Rotary encoder
LED bar
Center LED
AUTO
Display
SW key
4
Rotary encoder
LED bar
Center LED
AUTO
Display
Display
n–1
TALK
= CENT function ON/OFF
= 0 to 100% setting (0% = phantom center)
= Phantom center
Center fully active
= no function
= CENT; label of control parameter
0%; Phantom center
100%; Center fully active
= LsRs balance function ON/OFF
= LsRs balance setting
= fully left
center
fully right
= ON if LsRs in center position
= LsRs; label of control parameter
L30_; fully left
L00R; center
_30R; fully right
= F/S panning function ON/OFF
= F/S panning setting
= fully front
middle between front and back
fully back (surround)
ON if F/S panning in middle position
=
= F/S_; label of control parameter
_F30; fully front
__C_ ; center (middle) between front and back
_B30; fully back
= 5.1 panning function ON/OFF
= 5.1 panning setting
= fully left
center
fully right
ON if 5.1 panning in center position
=
= 5.1 ; label of control parameter
L30_; fully left
__C_ ; center
_30R; fully right
= Indication of panning selection (Page 1)
FEED indication (Page 2)
MODE indication (Page 3)
(Page 4 not used)
Date printed: 03.09.03