Loading An Existing Mix - Studer D950 Operating Instructions Manual

5.4.3

Loading an Existing Mix

Existing Mixes:
V3.0 Mixes:
Date printed: 27.08.03
Previously created Mixes from both V3.0 and V2.5 automation systems
may be used with AutoTouch+. Any previous Mix Pass can be loaded into
the Mix Pass Stack and become the Read Mix pass (Active Mix Pass) for a
subsequent Mix Pass. Mixes are accessed via the Automation menu on the
GC.
Existing Mix Trees and Mix Passes made with V3.0 software may be
loaded by selecting the following from the Automation menu:
• "Open Mix Tree...:" Loads an entire Mix Tree. A directory of existing
Mix Trees within the current Title will be displayed.
Double-clicking the desired Mix Tree (or selecting it and clicking
Open) will load that tree. The last used Mix Pass will be loaded in the
top position of the Mix Pass Stack and becomes the Active Mix.
• "Load Mix...:" Loads a single Mix Pass into the current Mix Tree. A
directory of existing Mix Trees within the current Title will be dis-
played.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-35