5.13.1.3 Loading Protection Sets - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System

5.13.1.3 Loading Protection Sets

5-108 AutoTouch+
2. Enter a name for the new set in the "New Protection Set:" field. Click
"Save" and the new set will be created and assigned the entered name.
The newly saved set will become the current Protection Set and will be
added to the list of available sets (which appears in the Protection Set
section of the Automation Protection window).
To make a Protection Set the current set, it must be Loaded unless it was
the last set used or saved.
Using the following procedure, previously created Protection Sets may be
loaded:
1. Click the Mix Protection Enabled button to open the Automation Pro-
tection window if it is not already open.
2. Click the "Load..." button and a selection box containing the available
Protection Sets will be displayed. The current Protection Set will be
displayed at the bottom of the box in the "Current Protection Set:"
field. The current set will also be shown in blue in the Protection Set
list. All others will be in black.
3. Double-click the desired Protection Set or click it and "Load". The
selected set will become the current set and the selection box will
close.
Note: Protection Sets cannot be loaded from other Titles. Protection Sets made
within a Title are only available to that Title. Protection Sets made within
a Title are available to all Mix Passes within that Title.
SW V3.3 Date printed: 27.08.03