What Subcategories Are There - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.4.2.1.3

What Subcategories are There?

Sources List:
Insert Send:
Ext Source:
Ext D19 Mic/Line Pre:
Targets List: Channel In1:
Channel In2:
Insert Return:
Digital Out:
Channel In3:
Dyn Ext Key:
Ext Target:
4-22 GC Operation
There are basically seven different subcategories for each of the Sources
and Targets Lists:
Sources
Digital In
Dir Out
Insert Send
Bus Out
Generator
Ext Source
Ext D19 Mic/line Pre
Each subcategory contains a number of Sources or Targets, depending on
the current Session Configuration. Sometimes certain sections will not be
present; for example, if no Channel Inserts have been configured, there
will be no Insert Send section within the Sources List, and no Insert Return
section within the Targets List.
The size of the X-Y General Patch automatically adapts to the number of
channels, input interfaces, output interfaces, and to the presence of DSP
function blocks in the channels – as defined in the Session Configuration.
Some detail information on the sections:
Digital In: All input audio interfaces (AES/EBU, MADI, or D21m A/D converters).
Dir Out: All Direct Outputs of all channel types.
Sends from the inserts of all channel types.
Bus Out: Unlike analog consoles, with the D950/Vista any bus is a valid audio sig-
nal source; AUX Mono Bus 12 can be used to feed an output interface, or
to become an input to an input channel.
Generator: The Test Generator's signal.
This is not an audio signal, but a logical Source to be used in conjunction
with future A/D converters (not used in this software version).
This is not an audio signal, but a logical Source to be used in conjunction
with the remote-controlled D19m Mic/Line Pre-amps/converters.
First audio input to all channel types,
• Free to use for all input channels,
• Used for default connection of the corresponding Bus for an output chan-
nel, such as a Group, Master, or Aux channel.
Second audio input to all channel types,
• Free for all input and output channels.
Returns to the inserts of all channel types.
All output audio interfaces (AES/EBU or MADI, D/A converters).
Third audio input to all channel types,
• Used for the Test Generator connection per default,
• Can be re-patched to any source at any time.
Input for the external control signal (key) to the Dynamics Sidechain of all
channel types.
This is not an audio signal, but a logical Target to be used in conjunction
with external converters.
SW V3.3
Targets
Channel In1
Channel In2
Insert Return
Digital Out
Channel In3
Dyn Ext Key
Ext Target
Date printed: 05.08.03