Central Assign Unit (Cau) - Studer D950 Operating Instructions Manual

D950 Digital Mixing System
2.5.7

Central Assign Unit (CAU)

2-32 Getting started
The Central Assign Unit (CAU) is used to control the
assignment of Channels to Buses, and is installed within
the central section. Dimensions: 121.8 × 190 mm.
The user selects a channel via the individual Channel SEL
key, or ← SEL → keys on the Central Assign Unit, which
provides access to all bus contributions from that channel.
The selected channel is indicated in the SELECTED
CHANNEL display.
Modifications of the bus assignment can be effected using
the CAU keys. The actual bus assignment is displayed on
the unit, and, at the same time, on the channel-related
audio display unit (if installed).
n–1 STEREO
n–1 MONO
GROUP
TRACK
AUX MONO
AUX STEREO
These master keys select the function of the 48 LED/key
array, and cause the CAU to display and control the bus
assignment for N–1/Mix-minus, Group, Track, and AUX
buses. The selected bus type is indicated within the
ASSIGNMENT TO display.
MONO Σ
These keys provide the bus assignment for up to eight
mono Master buses.
STEREO Σ
These keys provide the bus assignment for up to eight
stereo Master buses.
Σ DISPLAY STEREO
This key switches the LED array on the bar graph meters
to "ST", to indicate bus assignment to stereo Master buses
instead of mono buses.
← SEL →
These two keys used are used to select the channel to be
modified.
STEM
Future function.
INTERLOCK
Future function.
SW V3.3 Date printed: 03.09.03