Studer D950 Operating Instructions Manual page 133

INPUT DIR OUT
IN 1 Input Out ON
IN 2
Busses
GEN
Meters
1 2
ON ON
AUX
MONO
3 4
ON ON
1 2
ON ON
AUX
STEREO
3 4
ON ON
PROCESSING
EQ FILT
CMP/ EXP/
DYN
LIM GTE
INS
DLY
OPT
ASN
PAN
SEL
P r o c e s s i n g
USER USER
1 2
Date printed: 03.09.03
D. Local Assignment with Auto Assign Modes "In-Only":
• Press AUTO ASSIGN MODES on the Master Menu Selector once
(AUTO ASSIGN MODES is illuminated).
• Pressing the DYN–EXP/GTE key on the channel strip will assign the
Expander/Gate parameters to the LACP without pressing the ASN
SEL key, provided the function toggles to an IN (or ON) status. If it
toggles to an OUT (or OFF) status, the knob status does not change.
E. Local Assignment with Auto Assign Modes "In and Out":
• Press AUTO ASSIGN MODES on the Master Menu Selector twice
(the AUTO ASSIGN MODES key and the ASN SEL keys on all the
channel strips are illuminated).
• Every time the DYN–EXP/GTE key on the channel strip is pressed
(regardless of what status it toggles to), the Expander/Gate parameters
are assigned to the knobs on the LACP).
Notes: AUTO ASSIGN MODES and LINK ACCESS may be engaged at the same
time.
Example: Local Assignment
• Press ASN SEL on the Channel Strip; the ASN SEL key will flash.
The flashing ASN SEL key indicates Select Assignment Mode.
• Press DYN–EXP/GTE on the Channel Strip, followed by one of the
PAGE 1 through 4 keys, to control the required Dynamics Processing
parameters.
EQHI EQHI
n–1
1 2 TALK
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
EQHI
n–1 n–1
TALK TALK
1 2 1 2
3 4 LAST MODE 3 4 LAST MODE
PAGE PAGE
FREEZE FREEZE
D950 Digital Mixing System
EQHI EXP
n–1 n–1
TALK
1 2 TALK 1 2
3 4 LAST MODE 3 4 LAST MODE
PAGE PAGE
FREEZE FREEZE
Desk Operation 3-57
EQHI
n–1
TALK
1 2
3 4 LAST MODE
PAGE
FREEZE