Channel Selection Tool - Studer D950 Operating Instructions Manual

4.5.3

Channel Selection Tool

Date printed: 05.08.03
This tool allows one console Channel to be selected for control of various
centralized functions on the Graphic Controller, such as Channel Patch.
There are three arrow buttons:
Selects the previous channel from the list;
Selects the next channel from the list;
Opens the full Channel List to select a channel. Labels are displayed ac-
cording to the selected Label Mode (refer to
SW V3.3
D950/Vista Digital Mixing System
chapter 4.3.3).
GC Operation 4-79