5.13 Mix Protection - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System

5.13 Mix Protection

Mix Protection Enabled Button:
5-104 AutoTouch+
Mix Protection allows individual controls or sets of controls to be "Pro-
tected" or locked out from changes. Mix Protection may also be applied to
the General Patch.
When Protected, a control is essentially in a "read only" mode. The Read
Mix data for the Active Pass will be heard for all Protected controls. All
the READ LOCK conditions apply to Protected controls (just not on a
global basis).
Controls and the General Patch may also be isolated from the mix using
Mix Protection techniques.
The Mix Protection Enabled button opens the "Automation Protection"
window. The yellow LED symbol to the left of the button illuminates when
any controls are in a Protected State. The Mix Protection Enabled button is
located in the AutoTouch+ window.
The Automation Protection window can also be opened by selecting "Pro-
tection" from the GC Automation menu.
<Option> • With <Protect Static For Protected Controls> checked on the Misc Op-
tions page (also refer to
replayed, but changes to those values are not allowed.
SW V3.3
chapter 5.21.8), the values of Static controls are
Date printed: 27.08.03