Studer D950 Operating Instructions Manual page 454

D950/Vista7 Digital Mixing System
Event List Editor Operations:
5-124 AutoTouch+
Use the following procedures to select Events and/or Event Lists may be
chosen for editing:
• Individual Events: Individual Events may be selected by clicking the
Event label or the associated timecode. To select individual Events
from an Event List, the list must first be expanded.
• Event Lists: Individual Event Lists may be selected by clicking the
Event List header or the associated timecode.
• Selected Events and/or Event Lists: A group of selected Events and/or
Event Lists may be chosen using any of the following methods:
- Click and Drag: Click and hold on an Event or Event List and drag
the cursor over the desired items. This allows adjacent items to be
selected.
Control-clicking (holding the Ctrl key plus single-clicking): Allows
-
selection of individual Events and/or Event Lists anywhere within
the Event List Editor. Items may be selected regardless of location,
so non-adjacent items may be chosen.
- Shift-clicking (holding the Shift key and single-clicking): Allows
selection of a range of Events and/or Event Lists. Clicking a pair of
items while holding down the Shift key will select those items and
the ones in-between.
The following operations may be performed using the Event List Editor:
Redisplay Event List Near Current Timecode: Opens the Event List
closest to the current or selected timecode location.
Copy Event(s) to New Timecode: The selected Events and/or Event
Lists are copied and pasted to a new timecode location. When se-
lected, a timecode entry box will open.
Move Event(s) to New Timecode: The selected Events and/or Event
Lists are moved to a new timecode location. When selected a time-
code entry box will open.
Move Event(s) One Frame Earlier: The selected Events and/or Event
Lists are moved one frame earlier. The selected items are "nudged
backward."
Move Event(s) One Frame Later: The selected Events and/or Event
Lists are moved one frame later. The selected items are "nudged
forward."
Delete Selected Events: The selected Events and/or Event Lists are
deleted from the resultant Mix Pass. Caution: No warning prompt is
given. See Note below.
Expand and Show Each Event at a Timecode: All Events Lists are
opened and each Event is displayed with its timecode location.
Consolidate Multiple Events at Each Timecode: Only Events Lists
are shown at each timecode location. Individual Events will be
shown only if they are the only Event at that timecode location.
Filter Which Events to Display: Opens the Object Picker for the
Event List Filter.
SW V3.3 Date printed: 27.08.03