Studer D950 Operating Instructions Manual page 473

Highlight and Type:
Highlight and Roll:
+/– From Existing Time:
Right-Click Menu Selection:
Mix/Timecode Items:
Date printed: 27.08.03
• Highlight all or part of the entry field (hours, minutes, seconds, and
frames may be selected individually or as a group);
• Type in the desired timecode value (colons are not necessary when
typing);
• Press Enter.
• Highlight all or part of the entry field;
• Click and drag (roll) the value up or down; an upward trackball motion
will increase the timecode value, and a downward motion will decrease
the value;
• Stop at the desired value and press Enter.
• Press the + or – key from the computer keyboard, and an additional
Timecode Entry Field will appear;
• Using one of the highlight methods above, enter a timecode value;
• Press Enter. The math to add (+) or subtract (–) the entered value
to/from the existing timecode will be applied. The result of the math
will be entered as the new timecode address.
• Right-click any part of the entry field;
• A menu of timecode address selections from which to choose will ap-
pear;
• Use the click/drag method to select a timecode address included in the
menu.
The items contained within the Right-Click Timecode Menu are as fol-
lows:
• Mix Begin: This is the first timecode address within the selected mix
(the selected mix is the open mix that has been chosen with the tabs at
the bottom of the Object Picker or Mix Viewer); clicking the "In" but-
ton while holding the AUTO MODE key performs the same function.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-143