Mix Tree Click Functions - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System
5.4.1.4

Mix Tree Click Functions

Left-Click Functions:
Right-Click Functions:
5-32 AutoTouch+
A variety of "click functions" are available within the Mix Tree. These
functions range from
• Single-clicking a Mix Pass within the Mix Tree will "mark" that pass
by highlighting it in red. Clicking a marked pass will "unmark" it and
remove the red highlight. Only one mix at a time may be selected using
this method.
• Control-clicking (holding the Ctrl key and single-clicking) allows indi-
vidual Mix Passes anywhere within the Mix Tree to be marked or un-
marked. Any combination of passes may be marked.
• Shift-clicking (holding the Shift key and single-clicking) two Mix
Passes allows these passes and those in-between to be marked or un-
marked. The passes must be within the same branch or root-branch of
the Mix Tree. In this way, multiple passes may be marked. More im-
portantly, the link history of these passes is maintained.
• Double-clicking a Mix Pass adds it to the top of the Mix Pass Stack and
makes it the Active Pass. The Active Pass will be highlighted in green
in the Mix Tree.
• Right-clicking within the Mix Tree will open the Mix Tree Menu. Only
the items that don't pertain to individual passes or branches are shown.
• Right-clicking a Mix Pass within the Mix Tree will open the Mix Tree
Menu with all available items shown.
SW V3.3 Date printed: 27.08.03