Global Record; Pre-Selectors - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System
5.8

Global Record

Conditions:
5.8.1

Pre-Selectors

Pre-Selectors:
D950:
5-74 AutoTouch+
Controls can be "punched in and out" on a global basis. Global punch-ins
and punch-outs are accomplished in one of three ways:
1. Manually: Using the PUNCH-IN and PUNCH-OUT activator keys on the
GLOBAL RECORD section of the AutoTouch+ Panel
2. Automatically: Enabling the Write Zone and "Auto Punch-In/Out" in
the AutoTouch+ window of the Graphic Controller (GC). Refer to
chapter 5.8.4, Auto Punch In/Out.
3. Automatically via GPI input (refer to
If no controls of the type chosen of the Global Record Pre-Selector are
enabled, Global punch-in has no affect. Likewise, if no controls of the type
chosen of the Global Record Pre-Selector are in RECORD, Global punch-
out has no affect.
Note: Individual controls can be punched in and out independently of the Global
Record functions. This is done locally on the channel strip or on the D950
CAS.
Regardless of the punch method used, the Global Record Pre-Selectors
determine which controls are affected when a global punch-in occurs.
Multiple Pre-Selectors may be active at a time. Any and all combinations
are allowed. Pre-Selectors will illuminate when active.
The following describes the control classifications as defined by the
Global Record Pre-Selectors:
• FDR (Fader): The fader of all channel types
MUTE (Mute): The Mute of all channel types
•
ENC / KNOB (Encoders/Knobs): All continuous controller type encod-
•
ers (knobs or rotaries). This does not include knobs that control "se-
lectors", such as pan format, or phase inversion (for example).
SW (Switches): All switches (keys) and selectors (keys and knobs)
•
HELD (Held Controls): All controls that are currently in a "Held" sta-
•
tus. (This could be any combination of faders, mutes, switches, and
encoders). Refer to
Note: If no Pre-Selectors are active, then no controls will be punched-in or out.
SW V3.3
Vista:
chapter 5.7.3.
chapter 5.8.5).
Date printed: 27.08.03