Sysadmin: Surveyor; Sysadmin: Show Vmc Tree; Sysadmin: Desk (D950 Only) - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.7.2

SysAdmin: Surveyor

4.7.3

SysAdmin: Show VMC Tree

Show VMC Tree:
4.7.4 SysAdmin: Desk
Message to Desk Node:
Reset Desk Nodes:
Reload Desk Nodes:
Update Desk Display:
4-114 GC Operation
Surveyor: This action will open the Surveyor, which is used to check the status of the
D950/Vista system. Refer to
This feature is primarily used in troubleshooting and typically does not
have a use in normal operation.
This action will bring up the VMC tree View. This page will display a list
of all channels, inputs, outputs, buses, and other system elements that are
defined within the current Session Configuration. Double-clicking on one
of these items will display the contents of that item's branch. Opening of
subsequent branches will take further and further inside the VMC tree. If
the item has a changeable parameter, such as EQ high frequency, that pa-
rameter may be controlled directly from the VMC tree.
(D950 Only)
The Desk menu item contains several functions regarding the control desk:
This function will bring up the Desk Common Msg entry box;
This function will re-initialize the desk's control nodes and then reload the
data needed for operation;
This function will reload data for the desk's control nodes without re-
initialization;
This function will refresh the desk's display with the current data from the
PC.
SW V3.3
chapter 4.8.
Date printed: 05.08.03