Hold - Studer D950 Operating Instructions Manual

5.21.4

Hold

Held Plays Mix:
Clear Held Objects:
Date printed: 27.08.03
<Disable While Touched>: When HELD PLAYS MIX on the AutoTouch+
Panel is active channels that are Held, do not "play" their held auditioned
values, but play the Read Mix values instead. When this option is set,
touching a control at this time disables this feature and allows a new audi-
tion (punch) value to be established by being able to listen to the Audition
audio. If this option is unchecked, the Held Plays Mix function is not over-
ridden and the Read Mix continues to be heard.
<When Touch Hold Turned Off>: TOUCH HOLD (on the AutoTouch+
Panel) may be turned on and off during the course of a Mix pass. This op-
tions affects whether Held controls are cleared of their "held" status when
The Touch Hold mode is changed from On (active) to Off. If the option is
not selected, then changing the state of Touch Hold will have no effect on
Held controls.
<Upon Punch Out>: Touch Hold is used for a variety of purposes. Some-
time a write value needs to be held (so that un-touching the control while
Touch Record is engaged does not punch it out of record), just until the
control is punched out of record. At that point the control would return to
playing back the Read Mix. With this option set, that is how the behavior
would work. However, sometimes you will want to punch-in to that same
held value later in the mix pass, even after you have punched out for this
section of the mix. By deselecting this option the behavior will allow for
this operation. The held value will remain until it is cancelled by other
means. The new Mix Pass will, of course, not be affected.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-189