How To Use D950 Strip Setup - Studer D950 Operating Instructions Manual

4.4.6.2

How to Use D950 Strip Setup

Date printed: 05.08.03
To create a new Strip Setup or to adapt an existing Strip Setup – regardless
whether it belongs to a new Title, or has already been edited – first call up
the Strip Setup page. Note that the Strip Setup window displays the label
type of the console active at the time when opening the window.
Bank 1...5: First, use one of the Bank buttons to select the Bank to be edited. This will
display the two Layers of that particular Bank, and the current Strip As-
signment. Banks can also be selected using the Bank 1 through 5 keys of
the Bank Select Unit (BSU) in the center section of the console control
surface.
The Clear Current Bank button clears the assignments to both Layers
within the selected Bank.
Click on the Layer and Strip you want to assign or re-assign (the selected
Strip will be highlighted in blue), and click on its name with the right-hand
trackball key. A pop-up menu will appear with a list of all the configured
channel types. If you select a channel type, a list of all configured channels
for that channel type will be shown. To assign, click on the desired chan-
nel.
SW V3.3
D950/Vista Digital Mixing System
Channel Type Pop-up
Channel List for Selected Channel Type
GC Operation 4-65