Snapshot Crossfading - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.4.4.2

Snapshot Crossfading

4-48 GC Operation
It is possible to define a crossfade time for each Snapshot. This is done by
simply clicking on the crossfade time and scroll your trackball up or down.
If the crossfade feature is deactivated (see below), it is impossible to adjust
the crossfade time.
The Snapshot crossfading may be deactivated by deselecting the Xfade
Active option on the Snapshot Screen. On Vista 7, this can also be done by
pressing the GLIDE key on the AUTOMATION panel in the Control Bay.
Settings which cannot be crossfaded (switches) can either switch at the
beginning, in the middle of the crossfade or after the crossfade. This be-
havior can be defined in the Snapshot Automation Options window se-
lected from th Options menu. There, it is also possible to define a Default
Crossfade Time.
For an explanation of the Enable Trim Mode option, refer to
4.4.4.5.
SW V3.3
chapter
Date printed: 05.08.03