Studer D950 Operating Instructions Manual page 453

Event List Display:
Important Note:
Selecting Events to be Edited:
Date printed: 27.08.03
Note: Automated Graphic Controller items are not selectable using the Object
Picker for the Event List Filter.
Note: If objects are selected for display that do not have recorded Events, the
Event List will be empty.
Selected Events may be displayed in a number of ways.
• Individual Events: Individual Events will be displayed next to their
timecode location. The Event label contains the channel type, channel
number, control, and control value. Timecode locations are always
shown for each individual Events.
• Consolidated Event Lists: Only timecode locations with recorded
Events are displayed. If only a single Event is recorded, it will be dis-
played. If multiple Events have been recorded at the same timecode lo-
cation, an Event List header will be shown, but the contents will not be
displayed. The header label will indicate the number of Events in the
list and contains a + button. Clicking the + button will expand the list,
its contents will be displayed, and the + button changes to a – button.
Clicking the – button will close the list.
• Expanded Event Lists: All Events are shown individually. If an Event is
part of an Event List, the header will be the first item for that particular
timecode location.
Using the display modes listing above, any combination of displays may be
accomplished.
The use of the term "Mute" is used literally in the Event List Editor. If the
Mute is listed as "ON" in the Event List, the post fader channel output will
be cut. Muting will be activated. The associated key on the work surface
will not be illuminated (channel MUTE key on Vista and channel ON key on
D950). This may be a source of confusion for D950 users because the
channel is "off" and the ON key is not lit when the Event List indicates the
mute is "On."
Note: The Event List Editor only shows a subset of all the events stored within a
Mix Pass. Making an edit can change what is shown and depending on the
edit performed, some events may drop off the list.
Note: Timecode locations without recorded Events will not be displayed in the
Event List Editor.
From the Events chosen for display, single Events, an entire Event List, or
a selected group of Events and/or Event Lists may be chosen for editing.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-123