Studer D950 Operating Instructions Manual page 450

D950/Vista7 Digital Mixing System
Events and Event Lists:
Important Note:
Displayed Events:
Show Menu:
5-120 AutoTouch+
As a mix progresses, Events (automation records) are recorded at timecode
locations within a Mix Pass. These Events are organized by timecode and
displayed in the Event List Editor. If more than one Event is recorded at
the same timecode location, an Event List is created at that location. The
Event List will contain all Events recorded at that location.
Only the timecode location of an Event may be edited. Events may copied
to new locations or be deleted from the new Mix Pass.
Control values may not be changed using the Event List Editor.
Since a vast number of Events may be generated during a mix, Event Lists
become both very numerous and very large. In a large or complex project,
the number of events can grow to be overwhelming. To solve this problem,
the Events to be displayed may be selected in one of two ways:
• Show Menu Selections: The Event Editor will display only the items
selected in this menu
• Event List Filter: The Event Editor will display only the items selected
by the Event List Filter
Selecting an item from the "Show:" pull-down menu will select the Events
for that item's controls to be displayed in the Event List Editor.
SW V3.3 Date printed: 27.08.03