Studer D950 Operating Instructions Manual page 337

Application Examples:
Setup Keys [4] (D950 only):
Date printed: 27.08.03
• WRITE TO: LEVEL MATCH, NEXT CHANGE, END, and PUNCH OUT will
write the value at the time of punch-out possibly further ahead, rather
than immediately stop recording. The neutral setting is PUNCH OUT.
This will record no more after punch-out.
• EXTEND BACK TO: (D950) / WRITE TO: (Vista) BEGIN, PUNCH IN: These
keys can only be activated before starting a mix pass. They will write
the value at the time of punch-out as a constant value back to the begin
(setting BEGIN) or back to the point where the user punched in (setting
PUNCH IN).
In WRITE mode:
1 Correcting a constant value throughout a mix (WRITE TO: BEGIN)
2 In a music mix, when a solo is played: For finding a value while listen-
ing and applying the final value to the whole passage (WRITE TO:
PUNCH IN).
In TRIM mode:
1 Trim an object back to the beginning of a mix while keeping its move-
ments (WRITE TO: BEGIN)
2 Trim an object by a constant value between punch-in and punch-out
point, while keeping the movements (WRITE TO: PUNCH IN).
For storing or recalling mix option settings which define the behavior of
the automation system. Such a preset contains all option settings and can
either be assigned to specific keys or just stored in files.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-7