Studer D950 Operating Instructions Manual page 628

D950 Digital Mixing System
Rear View:
D15p/f
Configurable DSP channel processing blocks:
8-6 Technical Specs
I
0
All optical connections to the DSP frame are done on the front of the rack
directly onto the cards, and the optical cables are fed through the air
deflector panel to the back of the frame. The AES/EBU inputs and outputs
are all located at the back of the DSP frame on a selection of connector
panels:
• Two D-type 15 pin connectors per panel (standard).
• One Siemens 39 pin connector per panel (on request).
• 4 XLR connectors per panel (on request).
The exact number and type of DSP cards and connector panels depends on
the actual project specification. The MEMNET card also features one
external digital audio DARS sync input and 4 DARS outputs (AES11-
1991, also known as "AES black").
Input selector, input processing & filters, input mode, 4-band EQ, 4-band EQ with notch,
insert, variable delay, C/L/E/G dynamics, PAN, stereo PAN, multiformat PAN, VSP PAN,
direct out, IPL.
SW V3.3
AES IN
1-4
15p
D
f
15p
D
f
AES IN
5-8
AES OUT
1-4
15p
D
m
15p
D
m
AES OUT
5-8
SYNC IN
15p
D
f
SYNC OUT
15p
D
m
I
0
Date printed: 03.09.03