Modified Un-Touch Inverts; Option Modified Un-Touch Inverts <Touch Record - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System
5.7.6.1

Modified Un-touch Inverts

5.7.6.1.1 Option Modified Un-Touch Inverts <Touch Record>
Both Global Touch Record and Global Touch Hold inactive:
1a
1b
1c
Global Touch Record active, Global Touch Hold inactive:
2a
2b
Global Touch Record inactive, Global Touch Hold active:
3a
3b
3c
5-70 AutoTouch+
Note: To achieve the function mentioned above when Global Touch Record is
inactive, the "Modified Untouch Inverts" option (radio button "Touch Re-
cord") must be selected (also refer to
As an option, the Touch Record or Touch Held may have their modified
Un-touch function inverted. In other words, if the AUTO / AUTO MODE key
is held down when a control is Un-touched (released) the normal Un-touch
function of Touch Record or Touch Hold will be reversed.
Either Touch Record or Touch Hold may be selected for Un-touch inver-
sion, but not both.
<Option> • Either the <Touch Hold> or <Touch Record> function may be selected
for Modified Un-touch Inversion when the AUTO / AUTO MODE key is
held. This selection is made by clicking the desired radio button in the
<Modified Un-touch Inverts> section of the Misc Options page (also re-
fer to chapter
- Holding the AUTO / AUTO MODE key when an enabled control is touched,
will punch that control in RECORD. As long as the AUTO / AUTO MODE
key is held down, a touched control will be in RECORD. Un-touching the
control will return the status from RECORD to ENABLE.
If the control is touched and the AUTO / AUTO MODE key is released before
the control is physically un-touched, the control will remain in RECORD
even if the control is physically un-touched.
Even if the control remains in RECORD, the un-touch information is sup-
pressed.
- A control being in RECORD can be punched out by holding the AUTO /
AUTO MODE key, and touching and un-touching the control while the
AUTO / AUTO MODE key is being pressed. The control changes from
RECORD to ENABLE when the control is physically un-touched.
- While pressing the AUTO / AUTO MODE key, touching of a control that is in
ENABLE mode will not punch it into RECORD.
- Touching the control (causing it to change from ENABLE to RECORD)
and pressing the AUTO MODE key while still touching the control, then
releasing the control while still pressing the AUTO / AUTO MODE key will
cause the control to remain in RECORD and HELD status.
- Keep the AUTO / AUTO MODE key pressed. Touching and untouching a
control in ENABLE mode will punch the control in and out of RECORD.
Please note that the control is in HELD status, regardless whether it is in
RECORD or not.
- Keep the AUTO / AUTO MODE key pressed and touch a control that is cur-
rently in ENABLE mode. Keep the control touched and release the AUTO /
AUTO MODE key. The control will remain in RECORD.
- A control being in RECORD mode can be punched out by keeping the
AUTO / AUTO MODE key pressed, then touching and untouching the con-
SW V3.3
chapter
5.21.8).
5.21.8).
Date printed: 27.08.03