Autotouch+ Panel; D950 - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System

5.18 AutoTouch+ Panel

5.18.1

D950

5-154 AutoTouch+
[12]
[11]
[10]
[8]
[7]
[6]
[5]
[4]
[3]
[2]
[1]
Global CONTROL MODES (see also
[1]
READ – Sets selected objects (depending on the Pre-Selector setting) into
Read mode.
WRITE ENABLE – Sets selected objects (depending on the Pre-Selector
setting) into Write Enable mode. These parameters are "armed" and can be
put into write (record).
TRIM ENABLE – Sets selected objects (depending on the Pre-Selector set-
ting) into Trim Enable mode. These parameters are "armed" and can be put
into trim (record).
ISOLATE: Isolates selected objects (depending on the Pre-Selector setting).
These objects will not be affected by the automation.
SW V3.3
[13]
[15]
[14]
[9]
[16]
[17]
chapter 5.6)
Date printed: 27.08.03