Studer D950 Operating Instructions Manual page 61

OUT/
INPUT
N-1
EQ FILTER
EQ2
LIM/ EXP/
COMP GATE
INSERT DELAY
MONO ADD.
AUX AUX
STEREO
PAN
AUX
PAGE PAGE
1 2
PAGE PAGE
3 4
AUTO
SHOW
ASSIGN
VALUES
MODES
FREEZE LINK
OFF ACCESS
MENU
Date printed: 03.09.03
STEREO AUX
This key selects AUX Stereo Sends 1 through 8 for adjustment.
ADD. AUX
This key selects any additional AUX sends that exist in the configuration
(Mono Aux sends above 16, and Stereo Aux sends above 8).
PAN
This key selects the Panning section for adjustment.
PAGE 1...4
These keys provide Global Selection of pages 1 through 4 for the LACPs
of all channel strips.
SHOW VALUES
If activated, this key causes all LACP displays to always show Parameter
values. If not activated, all LACP displays will show the Names of the
functions until touched, at which point they show parameter values.
AUTO ASSIGN MODES
The AUTO ASSIGN function has three MODES:
Off AUTO ASSIGN MODES is dark, the console operates as "normal".
Pressing a processing IN/OUT key toggles the status of that key. (In this
mode, pressing ASN SEL on the channel strip is not necessary to change
the LACP assignment on a local basis.)
In-Only When pressing AUTO ASSIGN MODES a first time, the key is illumi-
nated. When pressing a processing IN/OUT key on a channel strip, the
knobs are assigned to that function, provided the function toggles to an IN
status. If it toggles to an OUT (or Off) status, the knob status does not
change.
In and Out When pressing AUTO ASSIGN MODES a second time, the key is illumi-
nated, together with the ASN SEL keys on all channel strips. Every time a
processing IN/OUT key is pressed (regardless of what status it toggles to)
the knobs are assigned to that processing function.
When pressing AUTO ASSIGN MODES for the next time, the auto assign
mode is switched off again – the key and all ASN SEL keys are dark.
FREEZE OFF
This key resets all Freeze functions on all channels; a function that enables
the Master Menu Selector to once again access all LACPs of all channels.
LINK ACCESS
If activated, the assignment functions of all strips can be linked.
When the user implements a local LACP assignment on one strip, the re-
maining strips will automatically follow.
As a result, all LACPs will always show the same section and page.
SW V3.3
D950 Digital Mixing System
Getting started 2-31