Studer D950 Operating Instructions Manual page 129

Example 2 (PAGE 2, COMP):
Dynamics control parameter (Limiter/Compressor)
RATIO
ATTACK TIME
RELEASE TIME/HOLD
THRESHOLD
Date printed: 03.09.03
1
SW
RTIO
AUTO
2
SW
ATCK
AUTO
3
SW
RLSE
AUTO
4
SW
THRS
AUTO
COMP
n–1
1 2 TALK
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
D950 Digital Mixing System
Available operating elements and their function
= Compressor ON/OFF
SW key
Rotary encoder = Ratio adjustment; 1:1 to 1:20
LED bar = Bar display for ratio; empty bar: 1:1, full bar: 1:20
Center LED = ON if ratio 1:1 is set
Display
= RTIO; label of control parameter
1/3; ratio 1:3
= no function
SW key
Rotary encoder = Attack time adjustment; 0.2 to 20 ms
LED bar = Dot display, indicates adjusted attack time
Center LED = no function
Display
= ATCK; label of control parameter
0.2; attack time 0.2 ms
SW key = HOLD function ON/OFF; ON=150 ms/OFF=0 ms
Rotary encoder = Release time adjustment; 100 ms to 10 s
LED bar = Dot display, indicates adjusted release time
Center LED = no function
Display = RLSE; label of control parameter
100m; release time 100 ms
SW key = no function
Rotary encoder = Threshold adjustment; 0 to –96 dBFS in 1 dB steps
LED bar = Bar display, indicates adjusted threshold
Center LED
= ON if 0 dBFS is adjusted
Display
= THRS; label of control parameter
–13; indicates threshold value –13 dBFS
= Indication of Limiter/Compressor selection
Display
LIM; limiter parameters (page 1)
COMP; compressor parameters (page 2)
CLVL; level/gain parameters (page 3)
KEY; common parameters for limiter and
compressor (page 4)
Desk Operation 3-53