Cue List Page - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.4.5

Cue List Page

4-58 GC Operation
The Cue List page of the Graphic Controller can be called up in three dif-
ferent ways:
• From the Page menu, by clicking on the appropriate menu item;
• Using Page icons, by clicking on appropriate icon in the Toolbar;
Using the CUE function key on the control surface keyboard – which
•
is probably the fastest way.
The Cue List is only available if the optional AutoTouch+ Dynamic
Automation and the TC2 or TC3 time code options are installed on your
D950/Vista. The Cue List helps to deal with parts of a musical piece or
film you want to keep track of in time. That could be an Intro, Chorus A,
Bridge, Chorus B, the End of a song, or a scene from the film you might
want to (auto-) locate to. An unlimited number of Cues can be stored.
Each Cue in the Cue List has a timecode stamp and a name. The names are
generated and numbered automatically when you make a cue, they can be
edited at any time along with the TC stamp. The cues in the Cue List are
automatically sorted by increasing TC. If you make a new cue, it will be
inserted into the list according to its TC stamp.
When the running TC passes a cue point existing in the List, a small trian-
gle will appear next to the cue to indicate that this particular cue has been
reached. The triangle will remain there until the next cue in the list is
reached, and so on.
SW V3.3 Date printed: 05.08.03