Held Plays Mix - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System
5.7.5.1

Held Plays Mix

5-68 AutoTouch+
• With <Held Objects> checked in the <End of Pass Clears> section of
the End of Pass Options page, all held controls are cleared at the end of
each Mix Pass.
The TOUCH HOLD key on the AutoTouch+ Panel may be overridden by
Note:
checking options on the <Master Panel Overrides> section of the Master
Panel Options page (also refer to
Switches can have TOUCH HOLD set to <ON> as an default option. When
using this option, care should be taken not inadvertently place controls into
Hold.
When the HELD PLAYS MIX key is engaged, all Held controls play their
Read Mix data when not in RECORD, but the controls can be set to differ-
ent physical positions.
The Read Mix data is heard, even though one or more controls are being
held in AUDITION. This allows a held control to be pre-positioned while
awaiting a punch-in. The result is true emulation of the resultant mix,
while the Mix Pass is being run.
<Option> • With <Disabled While Touched> checked in the <Held Plays Mix>
section of the Hold Options page (also refer to
HELD PLAYS MIX engaged, all held controls that are touched will change
to AUDITION for the duration of the touch. The AUDITION value will
be heard while the control is being touched. Upon release held controls
revert to playing the Read mix. This is useful when pre-positioning the
control before the punch. This "TOUCH AUDITION" mode allows the
Punch-In value to be determined by touching and moving the control to
the desired position and releasing it to return to hearing the Read mix.
The control retains it's AUDITION value awaiting Punch-In while the
Read mix is heard.
SW V3.3
chapter 5.21.5). Faders/Encoders and
chapter
Date printed: 27.08.03
5.21.4) and