Assigning The Panning Section - Studer D950 Operating Instructions Manual

3.3.13.1

Assigning the Panning Section

OUT/
INPUT
N-1
EQ FILTER
EQ2
LIM/ EXP/
COMP GATE
INSERT DELAY
MONO ADD.
AUX AUX
STEREO
PAN
AUX
PAGE PAGE
1 2
PAGE PAGE
3 4
AUTO
SHOW
ASSIGN
VALUES
MODES
FREEZE LINK
ACCESS
OFF
MENU
Date printed: 03.09.03
A. Global Assignment:
• Press PAN on the Master Menu Selector.
Displays of all Channel Strips will switch over to indicate the panning
control parameters, except those in FREEZE mode; see
• PAGE 1 is the only page available for Stereo PAN.
• PAGEs 1 through 4 are available for Surround PAN.
B. Local Assignment on the Channel Strip:
• Press ASN SEL; the ASN SEL key will flash.
• Press the PAN key. The Panning parameters will be displayed on the
LACP.
C. Local Assignment affecting all channel strips:
• Press LINK ACCESS on the Master Menu Selector.
• Pressing a local assignment key will now affect all Channel Strips. The
same functions as described in "B" are available.
D. Local Assignment with Auto Assign Modes "In-Only":
• Press AUTO ASSIGN MODES on the Master Menu Selector once
(AUTO ASSIGN MODES is illuminated).
• Pressing the PAN key on the channel strip will assign the Panning pa-
rameters to the LACP without pressing the ASN SEL key, provided
the function toggles to an IN (or ON) status. If it toggles to an OUT (or
OFF) status, the knob status does not change.
E. Local Assignment with Auto Assign Modes "In and Out":
• Press AUTO ASSIGN MODES on the Master Menu Selector twice
(the AUTO ASSIGN MODES key and the ASN SEL keys on all the
channel strips are illuminated).
• Every time the PAN key on the channel strip is pressed (regardless of
what status it toggles to), the Panning parameters are assigned to the
knobs on the LACP).
Notes: AUTO ASSIGN MODES and LINK ACCESS may be engaged at the same
time.
SW V3.3
D950 Digital Mixing System
chapter
Desk Operation 3-75
3.3.2.