Sorting Options; How To View The Different Label Types - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.4.2.5.1

Sorting Options

Sort by Fixed Label:
Sort by User Label:
4.4.2.5.2

How to View the Different Label Types

4-30 GC Operation
There is a number of options for sorting the display of the Sources and
Targets in the General Patch Lists. This sorting is independent of which
label type is being displayed due to the global label mode selection.
Independent of the User Label, the Sources and Targets will be sorted and
displayed in alphabetical order, depending on the Fixed Label of the
Sources/Targets.
The Sources and Targets will be sorted and displayed in alphabetical or-
der, depending on the User Labels of the Sources/Targets.
To select the sorting method, check the "Fixed Label" or "User Label"
option button as shown below:
If the "Use Subclasses" checkbox is selected, then the "Digital Input"
Source List and "Digital Output" Target List will be sorted and grouped by
the defined subclasses. This selection has highest priority of sorting.
F Tip The most useful sorting method is to Sort by "Fixed Label" and "Use Sub-
classes".
It is typical that a user will work in a single mode of label type display
within the GC. There are times, however, when it is useful to temporarily
display another of the label types globally within the GC to help with
patching. The Label mode is changed by clicking on the "Label" button in
the system toolbar:
Clicking this button will toggle the label view globally throughout all parts
of the GC (D950 and Vista) and channel strip display (D950 only). The la-
bel display can be toggled between "User", "Inherited" and "Fixed". For a
detailed description of how to work best with labels, see below.
SW V3.3 Date printed: 05.08.03