Ofla Editing - Studer D950 Operating Instructions Manual

Perform an Event List Edit:
5.16.2

OFLA Editing

Accessing OFLA:
Date printed: 27.08.03
Each time an Event List edit operation is performed, a new Mix Pass is
created.
Note: Deleting an Event or Event List is a destructive operation. However, the
original Active Pass on which the edit is to be performed is retained and a
new Mix Pass is created without the deleted item. In this regard, deleting
an item is a non-destructive operation.
To perform an Event List edit, use the following procedure:
1. Make the Mix Pass to be edited the Active Pass if it is not already.
2. Select "Event List Editor" from the GC Automation menu. The Event
List Editor window will open.
3. Click the Edit List Filter button to open the Object Picker for the
Event List Filter. Using this picker will allow Events for the desired
controls on selected channels to be chosen for editing. Once selected,
click either the Apply button (if more edits will be performed) or the
OK button (if no more objects need to be selected). Events for the
controls in the picker will be selected for editing and will appear in the
Event column of the Event List Editor window.
4. Click the desired edit operation. If moving or copying Events and/or
Event Lists, enter the new timecode location and click OK. The se-
lected edit will be performed.
5. A new Mix Pass is written that contains the edited values.
AutoTouch+ data may be edited using the OFLA offline mix editor. OFLA
is stand alone mix editor that may be used with or without AutoTouch+.
Being fully integrated with AutoTouch+, OFLA provides quick and easy
comprehensive Mix Pass editing when used in a session environment.
When used in an offline capacity OFLA is equally efficient.
OFLA allows the values of automation records to be edited within a time-
code window. Objects can also be made Static using OFLA.
OFLA is available by selecting "Edit Mix Pass" from the GC Automation
menu. This is different from V2.5 where OFLA is accessed via the "Edit
Mix" button in the GC Automation window.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-125