Ini Files - Studer D950 Operating Instructions Manual

6.2

*.ini Files

[d950systeminfo]
IsUS=No
NetIsUsed=No
HTTPIsUsed=No
IsAutoActive=Yes
IsBridgeActive=Yes
IsTestSystemActive=No
IsDeskActive=Yes
IsD19Active=Yes
IsGcActive=Yes
IsVistaActive=No
IsRegistryActive=Yes
IsMonActive=Yes
LastKnownIniFile=C:\D950SYSTEMDB\lastknownsession.INI
TccApplicationProgram=C:\D950SYSTEM\tcc02898.pgm
DefaultSystemdbDir=C:\D950SYSTEMDB
DefaultProductionDir=C:\D950PROJECTS
DefaultHTTPDir=C:\D950HTTP
MonitoringIniFile=
SysAdminPassword=
VmcTextOutput=No
VmcTextOutputFile=C:\D950SYSTEMDB\vmc.map
LogicalNetDriveName=
NetDriveName=
LogFile=C:\D950SYSTEM\D950system.log
// System stores all important information with this interval. Time in seconds, 1-86400. OFF=0
AutoSaveTime=0
[options]
TC2=Yes
TC3=No
MeterOverNet=No
DynamicAutomation=Yes
// If customer works with big mixes ( >15 MB), this option must be set to reserve memory. If no entry present,
// the value defaults to 10 MB. If value <5MB is entered, it defaults to 10MB.
MixSize=10
// "Yes" if the automatic drop-in should be done directly from D950 software by looking at the
// TC. "No" if the recorder should get IN and OUT points and should do the edits itself.
DO_AUTO_REC_EE=Yes
// If user wants to have REHEARSE and AUTO REC work multiple times when looping, this
// option must be set to "Yes" (Postroll time should be set to 0). Otherwise the machine may go into PLAY after
// having done the edit once.
IssueEditCommandAtLoopEnd=No
// 9Pin Record mode: "CrashRec" or "NoRec" (recording blocked) or "EditOnOff".
9PinRec=EditOnOff
// wrap around 24hours. "No" means that locating will stop at 0 or 23:59:59.ff. "Yes" means
// that yero crossing is allowed when working with offset set in the TC reader.
TC_ZERO_CROSS=No
// enter number of Pec/Dir panels. "0" means no Pec/Dir panel. Max no is "2". In software
// versions newer than 3.0 Pec/Direct panels are not supported anymore.
Pec/Direct=0
Date printed: 05.12.03
The D950 process is inquiring the
to decide which controller threads should be started in the
process.
SW V3.3
D950 Digital Mixing System
file during startup in order
D950system.ini
System Administration 6-7
D950system.exe