Eq 2 Mode Parameters On The Lacp - Studer D950 Operating Instructions Manual

D950 Digital Mixing System
3.3.7.4

EQ 2 Mode Parameters on the LACP

Example EQ2 Mode, General Page:
EQ2 mode control parameter
Last used HI band frequency
indication, HI band gain
Last used HM band frequency
indication, HM band gain
Last used LM band frequency
indication, LM band gain
Last used LO band frequency
indication, LO band gain
PHASE
3-40 Desk Operation
1
SW
2k51
AUTO
2
SW
2k51
AUTO
3
SW
2k51
AUTO
4
SW
2k51
AUTO
EQ 2
n–1
1 2 TALK
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
Available operating elements and their function
= Band ON/OFF (key is illuminated when ON)
SW key
Rotary encoder = Gain (boost/cut) adjustment
LED bar = Dot display, indicates gain setting
Center LED = On if gain = 0 dB (no boost/cut)
Display
= 141; frequency in Hz
2k51; frequency in kHz
SW key = Band ON/OFF (key is illuminated when ON)
Gain (boost/cut) adjustment
Rotary encoder =
LED bar
= Dot display, indicates gain setting
Center LED On if gain = 0 dB (no boost/cut)
=
Display 141; frequency in Hz
=
2k51; frequency in kHz
= Band ON/OFF (key is illuminated when ON)
SW key
Rotary encoder = Gain (boost/cut) adjustment
LED bar = Dot display, indicates gain setting
Center LED = On if gain = 0 dB (no boost/cut)
Display
= 141; frequency in Hz
2k51; frequency in kHz
SW key = Band ON/OFF (key is illuminated when ON)
Rotary encoder = Gain (boost/cut) adjustment
LED bar = Dot display, indicates gain setting
Center LED
= On if gain = 0 dB (no boost/cut)
Display
= 141; frequency in Hz
2k51; frequency in kHz
Display = Indication of EQ selection
EQ_2; EQ2 mode general page (page 1)
EQ_F; EQ2 mode frequency setting page (page 2)
EQ_Q; EQ2 mode Q setting page (page 3)
EQ_G; EQ2 mode gain setting page (page 4)
Date printed: 03.09.03