Studer D950 Operating Instructions Manual page 375

Vista Null Indications
Rotary Values:
Fader Values:
Conditions:
Date printed: 27.08.03
When a fader or encoder is placed in WRITE RECORD and is moved from
its Read Mix value, an arrow will illuminate to indicate which way the
control must be moved to match the Read Mix value. If it is the first time
the control is put into WRITE RECORD, its Read Mix value is the same as
its Static value.
The Vistonics™ concept allows to display the current and replay values of
rotary and fader controls in a very clear and comfortable way.
Current and replay value of the rotary control: If the current value is dif-
ferent from the one within the last mix pass, a pink colored element indi-
cates the value of the last mix pass, while the main display is indicating the
current value.
Current and replay value of the fader: If the current value is different from
the one in the last mix pass, a pink colored element indicates the value
within the last mix pass, while the main display is indicating the current
value.
• If touched and not in RECORD, the control will enter AUDITION for
the duration of the touch. The control will snap back to its Read value
upon release.
• With TOUCH RECORD engaged, the control will enter WRITE RECORD
(Punch-in) when touched and return to WRITE ENABLE (Replay) when
released (Punch-out). When released the control will snap back to its
Read value unless GLIDE is engaged. If glide is engaged the control will
glide back to its Read value.
• With TOUCH HOLD engaged, the control will enter AUDITION mode
when touched and holds the audition value when released.
• With TOUCH RECORD and TOUCH HOLD engaged, the control will enter
WRITE RECORD (Punch-in) when touched and stays in WRITE RECORD
when released. The control will stay in WRITE RECORD until punched
out or the Mix Pass has ended.
Note: Refer to chapter 5.7.5.1
SW V3.3
D950/Vista7 Digital Mixing System
for information regarding HELD PLAYS MIX.
AutoTouch+ 5-45