Audio Processing Functions - Studer D950 Operating Instructions Manual

D950 Digital Mixing System
3.1.1

Audio Processing Functions

3-4 Desk Operation
There are two ways to select an audio processing function:
• Globally, on the Master Menu Selector (MMS) unit, or
• Locally, on the upper part of the Input/Output unit.
Having selected an audio processing function (for example, EQ) on the
Master Menu Selector, the displays of all channels supporting this func-
tion will indicate the current parameters of this function. Settings can be
made with the switches and rotary encoders within the Local Assignable
Control Panel (LACP) section of the Input/Output unit. For several func-
tions, as many as sixteen parameters can be adjusted. These functions are
indicated on four different Pages with up to four parameters per page. The
PAGE 1 through PAGE 4 keys enable an operator to browse through these
pages.
Example 1: Select EQ on the Master Menu Selector; the EQ key located on the Master
Menu Selector illuminates.
INPUT
EQ
EQ2
LIM/
COMP
INSERT
MONO
AUX
STEREO
AUX
PAGE
1
PAGE
3
SHOW
VALUES
FREEZE
OFF
MENU
Now all channel strips supporting the EQ function will display the first
page of their EQ settings. Browsing through other pages can be performed
either with the PAGE 1 through 4 keys located on the Master Menu Se-
lector (simultaneously for all channels), or with the PAGE 1 through 4
keys located at the lower end of the LACP (for an individual channel).
SW V3.3
OUT/
N-1
FILTER
EXP/
GATE
DELAY
ADD.
AUX
PAN
PAGE
2
PAGE
4
AUTO
ASSIGN
MODES
LINK
ACCESS
Date printed: 03.09.03