Studer D950 Operating Instructions Manual page 471

D950/Vista7 Digital Mixing System
Mix Selection Menu: This pop-up menu box provides a list of mixes available to become the
Update Snap Source Mix. This list contains the same mixes that are avail-
able to the Active Mix and functions using the same selection techniques.
Note: The Update Snap Source Mix may be the same mix as the Active Mix.
Timecode Entry Field: For an Update Snap edit to be performed, a Data Point (a single timecode
address) must be selected from within the Update Snap Source Mix.
The Data Point is defined using a Timecode Entry Field. Update Snap
Source Mix has one Timecode Entry Field:
In Time: This is the point from which the Update Snap Source Mix data originates;
the timecode address of the Data Point.
The In Time for the Update Snap Source Mix is selected using the same
techniques used for selecting the Active Mix Timecode addresses.
Notes: The In Time selects the Data Point (a specific frame) from Update Snap
Source Mix. This fixed data is applied throughout the entire length of the
Active Mix. Therefore, the Active Mix does not contain any Timecode
Entry Fields (In, Out, or Length) when Update Snap is selected as an Edit
Type.
Refer to chapter 5.16.4 for additional details regarding timecode entries.
AutoTouch+ 5-141
Date printed: 27.08.03 SW V3.3