2.5.14
20-Pushbutton Source Selector
2.5.15
Assignable Source Selector
Date printed: 03.09.03
A number of these Source Selector units can be specified for the Control
Room Monitor Unit and the Studio Monitor Unit to provide selection of
monitor sources. Sources to be monitored are configured onto the appro-
priate keys using a monitor configuration file. Source labels are inscribed
using transparent inlays. This unit is usually located within the center sec-
tion and is labeled as STUDIO. Dimensions: 40.6 mm × 190 mm (2U).
The Assignable Source Selector is intended for use with the Multi-format
Monitor Unit for monitor selection of mono, stereo, and surround sources.
A number of these 10-key selectors can be specified. The unit can also be
used with the stereo CR Monitor Units and the Studio Monitor Units if de-
sired.
Sources to be monitored are configured onto the appropriate keys using a
monitor configuration file. Programmable source labels are displayed on
the eight-character legend adjacent to each key. This unit is located usually
in the center section of the desk and typically has the C.R. label. Dimen-
sions: 80 mm × 190 mm (2U).
SW V3.3
D950 Digital Mixing System
Getting started 2-41