Studer D950 Operating Instructions Manual page 598

D950/Vista Digital Mixing System
How to Make a Parallel Desk?
7-32 ConfigTool
Use the MultiDesk Groups checkboxes in the Edit Bus and Add Channel
dialogs in order to assign channels and buses to the two desks (operators).
The following example shows a two-operator parallel desk configuration,
whereby the inputs of the desks are independent of each other, but the
masters are common and both operators have access to the same master
buses.
8 input channels
selected to Desk 1
8 input channels
selected to Desk 1
The DSP capacity again is sufficient for a total of 20 input channels and
six master channels. Operator 1 sees eight input channels and all six mas-
ter channels, and Operator 2 sees twelve input channels and all six master
channels.
SW V3.3
Common bus
and master
access
Date printed: 05.08.03