End Of Pass - Studer D950 Operating Instructions Manual

5.21.7

End Of Pass

End of Pass Clears:
Date printed: 27.08.03
The End of Pass options determine the behavior of specific functions when
a Mix Pass is terminated by stopping timecode. At the end of a Mix Pass
each of the options control this behavior in the following manner.
<Record>: If any controls are in record when the mix pass is ended they
will be punched out of record if this option is set.
<Write To End>: Because Write To End is a very destructive feature (al-
though very much used and useful), this option ensures that it is only used
for one pass and Write to End Reverts to Punch-In at the end of a Record
Pass. There will be no effect by a play pass (which is the case with all of
these options).
<Extend Back to Begin>: Like Write To End, this destructive function can
be set to be cleared after a Record pass has been written.
<Extend Back to Punch-In>: Same as above.
<Held Objects>: There are times when you want to hold objects (in record
or audition) and have them revert to playing the Read Mix data when the
next pass is run. And there are time when you want to audition a level and
then run the pass again to do the actual record pass. In this case, by un-
checking this option the controls can be held across passes.
<...Only if Touch Record Active>: When checked, End of Pass will clear
the items above only if Touch Record was active.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-193