Studer D950 Operating Instructions Manual page 139

Example 2 (PAGE 2, EXP):
Dynamics control parameter (Expander/Gate)
RATIO
ATTACK TIME
RELEASE TIME/HOLD
THRESHOLD
Date printed: 03.09.03
1
SW
RTIO
AUTO
2
SW
ATCK
AUTO
3
SW
RLSE
AUTO
4
SW
THRS
AUTO
EXP
n–1
1 2 TALK
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
D950 Digital Mixing System
Available operating elements and their function
SW key = Expander ON/OFF
Rotary encoder = Ratio adjustment; 1:1 to 20:1
LED bar
= Bar display for ratio; empty bar: 1:1, full bar: 20:1
Center LED ON if ratio 1:1 is set
=
Display = RTIO; label of control parameter
3/1; ratio 3:1
SW key = no function
Rotary encoder = Attack time adjustment; 0.2 to 1 ms
LED bar = Dot display, indicates adjusted attack time
Center LED
= no function
Display
= ATCK; label of control parameter
0.2; attack time 0.2 ms
SW key = HOLD function ON/OFF; ON=150 ms/OFF=0 ms
Rotary encoder = Release time adjustment; 100 ms to 10 s
LED bar = Dot display, indicates adjusted release time
Center LED
= no function
Display
= RELT; label of control parameter
100m; release time 100 ms
1s; release time 1 s
SW key = no function
Rotary encoder = Threshold adjustment; 0 to –96 dBFS, 1 dB steps
LED bar Bar display, indicates adjusted threshold
=
Center LED Full bar = 0 dBFS, empty bar = –96 dBFS
=
Display = ON if 0 dBFS is adjusted
THRS; label of control parameter
– 13; indicates threshold value –13 dBFS
=
Display Indication of Expander/Gate selection
GATE; gate parameters (page 1)
EXP; expander parameters (page 2)
LFWD; look forward time (page 3)
KEY; common parameters for expander and
gate (page 4)
Desk Operation 3-63