Studer D950 Operating Instructions Manual page 582

D950/Vista Digital Mixing System
Add More Channels
Edit the Stereo Input Channel
7-16 ConfigTool
As you can see, this configuration is for a console that has:
• 4 mono input channels
• 2 stereo input channels
• 2 mono groups + 2 group buses
• 2 mono masters + 2 master buses
• 4 mono Auxes + 4 mono AUX buses
• 2 stereo Auxes + 2 stereo AUX buses
• 2 SOLO buses
• 1 stereo PFL bus
Double-click on the channel area labeled "Input mono". This will open an
editing dialog box which will allow you, among other things, to change the
number of mono channels:
Go to the "Number of channels" area and change the number from 4 to 8.
Click on OK. Now you have increased the number of mono input channels
to eight.
Now we will change the stereo input channel configuration and name.
Double-click on the channel area labeled "input stereo". On the left-hand
side, in the area called "X Bar Section", double-click on "Dynamics" and
on "Delay 100 ms". This will remove those two functions from the stereo
input channel. Now move to the area called "Library / Available Func-
tions" and double-click on "Delay 240 ms". Then go to the "User Label"
field and type in "my stereo". Click on OK.
SW V3.3 Date printed: 05.08.03