System Functions: Toggle Control Group (D950 Only) - Studer D950 Operating Instructions Manual

4.5.4.2

System Functions: Toggle Control Group (D950 only)

Date printed: 05.08.03
The concept of Control Groups is used for MultiDesk operation, where:
• Several independent operators work at the same time on the same
desk;
• Several desks are supported by one DSP Core and Control System.
Control Groups are defined within the Session Configuration Tool (see
chapter 7.4.3.4.1) and set up according to the requirements of a particular
studio. During this configuration process, several mostly independent
Workspaces for the GC and the Desk Surface are defined. To move from
one Workspace to the next, click on the corresponding Control Group
icon.
When you click on a Control Group icon, you will need to confirm this
action by clicking the
desired Group.
Control Groups may be configured to have:
• Independent Desks;
• Independent areas in the Patch;
• Control over different console Channels;
• Separate and independent Titles, Snapshot Lists, Cue Lists, User Pref-
erences, etc.
SW V3.3
D950/Vista Digital Mixing System
OK
button before the Workspace is toggled to the
GC Operation 4-81