Studer D950 Operating Instructions Manual page 112

D950 Digital Mixing System
3-36 Desk Operation
B. Local Assignment on the Channel Strip:
• Press ASN SEL; the ASN SEL key will flash.
• Press the EQ key.
• Press one of the PAGE 1 through 4 keys on the Channel Strip to select
band or control sets.
C. Local Assignment affecting all Channel Strips:
• Press LINK ACCESS on the Master Menu Selector.
• Pressing a local assignment key will now affect all Channel Strips. The
same functions as described in "B" are available.
D. Local Assignment with Auto Assign Modes "In-Only":
• Press AUTO ASSIGN MODES on the Master Menu Selector once
(AUTO ASSIGN MODES is illuminated).
• Pressing the EQ key on the channel strip will assign the EQ parameters
to the LACP without pressing the ASN SEL key, provided the function
toggles to an IN (or ON) status. If it toggles to an OUT (or OFF)
status, the knob status does not change.
E. Local Assignment with Auto Assign Modes "In and Out":
• Press AUTO ASSIGN MODES on the Master Menu Selector twice
(the AUTO ASSIGN MODES key and the ASN SEL keys on all the
channel strips are illuminated).
• Every time the EQ key on the channel strip is pressed (regardless of
what status it toggles to), the EQ parameters are assigned to the knobs
on the LACP).
Notes: AUTO ASSIGN MODES and LINK ACCESS may be engaged at the same
time.
When using any form of local assignment of EQ parameters, whichever
EQ mode (EQ1 or EQ 2) that was last selected on the Master Menu Selec-
tor will be applied. EQ modes cannot be changed from the channel strips.
SW V3.3 Date printed: 03.09.03