Software Version - Studer D950 Operating Instructions Manual

D950 Digital Mixing System

Software Version

Software Update Information
Prepared and edited by
Studer Professional Audio GmbH
Technical Documentation
Althardstrasse 30
CH-8105 Regensdorf - Switzerland
http://www.studer.ch
Studer is a registered trade mark of Studer Professional Audio GmbH, Regensdorf
The functions and features described herein cover the software version
V3.3, unless otherwise stated.
The information in this manual has been carefully checked and is believed
to be accurate at the time of publication. Nevertheless, nobody is perfect. If
you should stumble on an error, we kindly ask you to inform us on that
matter in writing (address and web site below). We are grateful for every
hint. No responsibility can be taken by us for inaccuracies, errors, or omis-
sions, nor is any liability assumed for any loss or damage resulting either di-
rectly or indirectly from use of the information contained within this manual
and any accompanying documents.
Software updates may take three basic forms:
• Full software version – full package with installer software on a suitable
data carrier, usually a ZIP cartridge,
• New features, improvements – parts of the software that may be sent via e-
mail or downloaded from our Web site, including installation instructions,
• Hardware improvements – low-level software may be distributed on
EPROMs or other programmable devices.
Our product support shall inform all registered users on the availability and
software forms.
Copyright by Studer Professional Audio GmbH
Printed in Switzerland
Order no. 10.27.4832 (Ed. 0903)
Subject to change