Edit Types - Studer D950 Operating Instructions Manual

5.16.6

Edit Types

General Information:
Update Snap:
At Out Time:
Restore Values:
Write To End:
Write To Next Change:
Date printed: 27.08.03
Parameters of similar type may be selected from similar types of objects.
For example, ON/OFF parameters may be selected from Filters, EQ, Dy-
namics, Delay, and other objects that contain ON/OFF switches. However,
parameters that are dissimilar may not be chosen for Set and Trim Edit
Types.
Note: When incompatible parameters are selected (such as Fader level and
Mute), Set and Trim Edit Types are not functional and values cannot be
entered. This is indicated by a "Grayed Out" Value Entry Field.
In order to provide power and versatility, OFLA offers seven distinct Edit
Types. Each provides an edit function designed to perform a specific task.
Edit Types can be chosen by clicking the arrow at the end of the display. A
list of Edit Types will be displayed. Clicking one of the Edit Types will
select it for use. Edit Types can also be selected using click-drag method in
the Edit Type window.
Edit Types are as follows:
Set: Parameters selected for editing will be set to the entered value for the du-
ration of the Edit Region;
Trim: Data for the parameters selected for editing will be offset by the entered
value for the duration of the Edit Region;
Freeze: Data for the parameters selected for editing will be frozen at the In Time
for the duration of the Edit Region;
Clear: Data from the VMC Defaults will be applied to the parameters selected for
editing for the duration of the Edit Region;
Spread: Data from a single point in an external mix will be applied to the parame-
ters selected for editing for the duration of the Edit Region;
Merge: Data from a region of an external mix will be applied to the parameters
selected for editing for the duration of the Edit Region;
Data from a single point in an external mix will be applied to the parame-
ters selected for editing for the entire mix. This is a function corresponding
to "Update Mix Snapshot" in the D950 System Mix Options menu.
Controls are provided that determine what happens to the data (for the
parameters selected for editing) that exists after the Edit Region. These ra-
dio buttons are contained in the "At Out Time" section of the Edit Type
combo box. Only one of these options may be selected.
The functions of these controls are as follows:
The data from the Active Mix that exists after the Edit Region is retained.
The data from the last frame of the Edit Region is written to the end of the
mix.
The data from the last frame of the Edit Region is written for each selected
parameter until there is an original value change for that parameter in the
Active Mix.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-149