Studer D950 Operating Instructions Manual page 583

D950/Vista Digital Mixing System
Add More AUXes Now we will add two more mono AUX masters. Double-click on the
channel area labeled "AUX mono" and change the number of channels to
6. Click on OK.
Now you will have to adapt the number of AUX mono buses to reflect the
above change. Double-click on the area labeled "Aux m Bus".
This will open a dialog that will allow you to set the number of buses to 6,
matching the new number of AUX mono channels.
Enter "6" instead of "4" and click on OK. This will add two more AUX
mono buses to the system.
Add New Group Channels Now double-click on the channel area labeled "new". This will allow you
to select a channel type and set its contents and number. Click on "Channel
Attributes / Type" and select "Group mono".
This will select the channel type to mono group. Set the "Number of chan-
nels" to 2. Add "4-Band EQ" from the library by double-clicking on this
item. Type in "my GRP" in the user label area and click on OK. This will
add two more audio groups including EQ to the configuration. Note that
you now have two sets of mono group channels with completely different
audio processing sections called "my GRP" and "Example". Note also that
the bus connections have been extended with the small "on/off" boxes in-
dicating that the two new groups will have access to Master, Solo, PFL
and AUX buses. By clicking on the "on/off" box corresponding to the
Master Bus, you can disable access from the new groups to the masters –
so they can only be used for direct outputs.
ConfigTool 7-17
Date printed: 05.08.03 SW V3.3