Studer D950 Operating Instructions Manual page 96

D950 Digital Mixing System
Example: Stereo channel
Stereo input control parameters
PHASE
XY/MS
INPUT MODE
INPUT GAIN
DC REJECT
PHASE
3-20 Desk Operation
SW
PHAS
SW
MS
SW
MODE
and
SW
GAIN
IN 1
TALK
1 2
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
Available operating elements and their function
1
SW key
Rotary encoder
LED bar
Center LED
Display
AUTO
2
SW key
Rotary encoder
LED bar
Center LED
Display
AUTO
3
SW key
Rotary encoder
LED bar
AUTO
Center LED
Display
4
SW key
AUTO
Rotary encoder
LED bar
Center LED
Display
Display
n–1
= select phase NORM, PH_1, PH_2, PH12
= select phase NORM, PH_1, PH_2, PH12
= no function
= no function
= PHAS; label of control parameter
NORM; in phase
PH_1; CH1 (left) out of phase
PH_2; CH2 (right) out of phase
PH12; both channels out of phase
= select mode XY, MS
= no function
= no function
= no function
= XY; XY mode
MS; MS mode
= select input mode ST, REV, L__L, R__R, MONO
= select input mode ST, REV, L__L, R__R, MONO
= ST
REV
L__L
R__R
MONO
= no function
= MODE; label of control parameter
ST; stereo (default setting)
REV; left and right signals swapped
MONO; mono
L__L; left signal to left and right channel
R__R; right signal to left and right channel
= DC reject ON/OFF (SW key is
illuminated when DC reject is ON)
= Input gain setting
= Bar display, indicates input gain
= On at input gain = 0 dB
= GAIN; label of control parameter
– 20; indicates set input gain value
= Indication of selected input
IN_1; input 1 (page 1)
IN_2; input 2 (page 2)
GEN; test generator (page 3)
MICP; preamp control (page 4)
Date printed: 03.09.03