Editing The User Labels In The General Patch - Studer D950 Operating Instructions Manual

4.4.2.5

Editing the User Labels in the General Patch

For D950 Users:
For Vista Users:
Date printed: 05.08.03
To edit the User Labels in the General Patch, first click on the desired
Source/Target in the Sources/Targets list. The User Label and Fixed Label
for the chosen Source/Target will be shown in the Label Fields at the bot-
tom of the screen:
Click on the User Label Field of the Source/Target. This will open a dialog
box which allows a User Label to be entered:
To automatically move to the next Source/Target in the list, either click on
"Next" or hit ENTER on the keyboard. To close the dialog box click on
"OK". It is possible to choose a Source/Target from the General Patch list
without closing the Edit User Label dialog box. Simply click on the de-
sired Source/Target from the General Patch list with the window still open.
This will automatically enter it into the window for editing.
The first four characters of the User Label will be displayed in the channel
strip display when "Inherited Labels" are selected to be shown. It is im-
portant to choose sensible labels that will show useful information in the
first four characters. The screenshot above shows an example of integrat-
ing two labels into one, e.g. M3__Mic_03.
User Labels with up to 13 characters (depending on the width of the indi-
vidual characters) can be used for Digital Input sources.
SW V3.3
D950/Vista Digital Mixing System
GC Operation 4-29