5.23 Hot Keys - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System

5.23 Hot Keys

Hot Key Functions:
5-198 AutoTouch+
V3.0 software supports a variety of "Hot Keys" (shortcut keys) that im-
prove efficiency when operating the system. These Hot Keys assist in the
management of timecode entry and information.
Note: This chapter assumes that the appropriate window or entry box is active.
Appropriate fields or sections of fields are highlighted, and/or the cursor is
placed appropriately.
Hot Key functions are described in the table below.
Key
Right Arrow
Left Arrow
Shift Right Arrow
Shift Left Arrow
B, b
E, e
Space, t or T
G or g
C or c
P or p
R or r
M or m
S or s
L or l
Shift Space
Home
End
Shift Home, End
Single Click
Double Click
Delete
Up Arrow
Dn Arrow
Pg Up
Pg Dn
Digit
SW V3.3
Function
Next Field to the Right
Next Field to the Left
Extend Selection one Field to the right
Extend Selection one Field to the left
Captures the current mix start time
Captures the current mix end time
Captures current system time
Goto.. locates the system to the time in the control
Copies the FOD to a special copy buffer
Pastes the FOD from the copy buffer
Clears the timecode to 00:00:00:00
Clears the Most Recently used Timecode List
Toggles the Sorted view of the most recently used timecodes in
the context menu
Toggles the locking state of the most recently used Timecode List
(accept or don't accept further changes taken)
Selects all fields
Selects Hours field
Selects Frames field
Extends selection appropriately
Selects Field
Selects All fields
Zeros out selection
Bumps Selected Field Up (if more than one field is selected it will
bump by the right most field and keep the selection active)
Holding Shift puts it into X10 Mode.
Bumps Selected Field Down (if more than one field is selected it
will bump by the right most field and keep the selection active).
Holding Shift puts it into X10 Mode.
Bumps Selected Field Up by 10 (if more than one field is selected
it will bump by the right most field and keep the selection active).
Bumps Selected Field Down by 10(if more than one field is se-
lected it will bump by the right most field and keep the selection
active)
Places the selected fields into edit mode. All unselected fields will
be grayed to indicate edit mode. Once in edit mode, all digits
entered will shift previous digits to the left. Most non-digit keys
and trackball click activity will leave edit mode. When leaving edit
mode the new timecode is checked for validity.
Continued...
Date printed: 27.08.03