Studer D950 Operating Instructions Manual page 249

Adding a Whole Bus to the Snapshot Filter
Audio Settings:
Input/Bus Assign Settings:
General Patch Setting:
User Labels:
Date printed: 05.08.03
In edit snapshot filter mode (as described above), the following window is
shown on the GC screen:
This window allows adding a whole group of parameters to your snapshot
filter. Either select one of the four groups on top, or one of the listed buses.
Will add all channel processing functions to your snapshot filter.
Will add the input switches of all channels as well as all bus assignments
to your snapshot filter.
Will add the General Patch to your snapshot filter, meaning that no patch
points will change when recalling a snapshot.
Will add all user labels (within the General Patch as well as within the
channel strips) to the snapshot filter.
Bus: This is a very powerful feature. By clicking e.g. on "Aux m 1", you will
add all relevant parameters to your snapshot filter, such that the Mono
AUX Bus 1 will not be influenced by any snapshot recalling. Included are:
•
The levels of all channels routed onto that bus
•
The bus assign (on/off switch) of all channels for that bus
•
The corresponding master channel with all its settings
•
The output patch made from that master channel to any output ports.
SW V3.3
D950/Vista Digital Mixing System
GC Operation 4-53