Studer D950 Operating Instructions Manual page 97

Example: Pre-amplifier parameters (appear only if pre-amps are available and assigned to a channel input)
Preamp control parameters
LINE INPUT
MIC INPUT
HIGH-PASS FILTER
(MIC input only)
PHANTOM POWER
PHASE
Date printed: 03.09.03
1
SW
LINE
AUTO
2
SW
MIC
AUTO
3
SW
HPF
AUTO
4
SW
48 V
AUTO
MICP
MODE
1 2 AUTO STAT
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
D950 Digital Mixing System
Available operating elements and their function
SW key = Input selector LINE,mutually releasing with MIC
Rotary encoder = Input gain (for details refer to section "Preamplifier
control parameters" above)
LED bar
= Bar display, indicates input gain
Center LED
= On at input gain 0 dB
Display
= LINE; label of control parameter
–9; indicates set input gain
Input selector MIC, mutually releasing with LINE
SW key =
Input gain (for details refer to section "Preamplifier
Rotary encoder =
control parameters" above)
= Bar display, indicates input gain
LED bar
Center LED = On at input gain 0 dB
Display = LINE; label of control parameter
–5; indicates set input gain
= High-pass filter ON/OFF; key is illuminated if ON
SW key
= no function
Rotary encoder
= no function
LED bar
Center LED = no function
Display = LPF; label of control parameter
= Phantom power ON/OFF ; key is illuminated if ON
SW key
no function
=
Rotary encoder
no function
LED bar =
no function
Center LED =
48_V; label of control parameter
Display =
Display = Indication of selected input
IN_1; input 1 (Page 1)
IN_2; input 2 (Page 2)
GEN; test generator (Page 3)
MICP; preamp control (Page 4)
Desk Operation 3-21